Analog
Analog audio processing uses continuous electrical signals, introducing harmonic saturation and non-linearities that define the sound of recorded musi
→
Attack
Attack defines how quickly a dynamics processor or envelope responds to an incoming signal, shaping punch and transient character.
→
Bus Compression
Bus compression unifies grouped tracks or a full mix by gently controlling collective dynamics — the technique behind the 'glue' sound in professional
→
Clipping
Clipping flattens waveform peaks beyond a system's ceiling, introducing harmonics — destructive in the wrong context, musical in the right one.
→
Compression
→
De-Esser
A frequency-selective compressor targeting sibilance and high-frequency harshness in vocals, drums, and mix buses.
→
Distortion
Distortion reshapes waveforms to generate harmonics — from gentle tube warmth to brutal hard clipping — and is foundational across every genre.
→
Dynamic Range
Dynamic Range is the dB span between a signal's loudest peak and its noise floor — the core of all loudness, punch, and emotional contrast in a mix.
→
Exciter
Exciter synthesizes high-frequency harmonics to add air, presence, and definition to audio that compression or the recording chain has dulled.
→
Expansion
Expansion increases dynamic range by attenuating signals below a threshold — the inverse of compression, essential for noise reduction and transient c
→
Feedback
Feedback is an output-to-input signal loop that underlies delay effects, guitar sustain, and everything from subtle warmth to ear-splitting noise.
→
FET Compressor
FET compressors use field-effect transistors for near-instant gain control, delivering the punchy, aggressive sound central to modern recording.
→
Filter
A filter attenuates selected frequency ranges, shaping tone in synthesis, mixing, and mastering through cutoff, slope, and resonance.
→
Gain Reduction
Gain Reduction is the dB attenuation a compressor or limiter applies when a signal crosses the threshold.
→
Gain Structure
The art of calibrating every stage of your signal chain so noise stays buried and headroom stays open.
→
Knee
Knee shapes how abruptly a compressor engages at the threshold — from instant hard-knee snap to smooth soft-knee onset.
→
Limiting
Limiting caps signal peaks at a defined ceiling — the last and most powerful tool for loudness and transient control.
→
Makeup Gain
Makeup Gain restores output level lost to gain reduction — the essential final step in any compression chain.
→
Multiband Compression
Multiband compression splits a signal into frequency bands and compresses each independently, giving producers surgical dynamic control across the spe
→
Noise Gate
A dynamic processor that silences audio below a set threshold, eliminating noise, bleed, and ambience between musical phrases.
→
Optical Compressor
An optical compressor uses a light-dependent resistor to achieve smooth, musical gain reduction prized on vocals, bass, and mix buses.
→
Overdrive
Overdrive adds warm soft-clipping harmonics that emulate pushed tube amps — essential color for guitars, bass, drums, and beyond.
→
Parallel Compression
Blend heavy compression with the dry signal to add punch, density, and sustain without sacrificing transient impact.
→
Phase Cancellation
Phase cancellation happens when offset waveforms combine destructively, thinning mixes or killing low end.
→
Ratio
Ratio governs how aggressively a compressor clamps dynamics above the threshold — from subtle 2:1 glue to brick-wall ∞:1 limiting.
→
Release
Release controls how quickly a compressor lets go — defining punch, sustain, and the rhythmic feel of every element in your mix.
→
Saturation
Saturation adds harmonic distortion that emulates tape, tubes, and transformers — giving digital audio analog warmth and density.
→
Sidechain
A secondary audio path that lets one signal control the dynamic processing applied to a completely different signal.
→
Signal Chain
The complete ordered path audio travels from source to output — and why that order defines everything you hear.
→
Threshold
Threshold sets the dB point where a dynamic processor activates — the single most critical parameter in compression and gating.
→
Transient
The sharp onset spike of a sound — controlling transients defines punch, clarity, and mix impact.
→
Transient Shaper
A dynamics processor that independently sculpts the attack and sustain of a sound, independent of signal level.
→
Tube Compressor
A vacuum-tube dynamic processor delivering warm, program-dependent gain reduction with harmonic saturation prized across every mixing context.
→
VCA Compressor
A voltage-controlled dynamics processor prized for speed, punch, and the 'glue' it adds to buses and full mixes.
→